Rear Wheel

The tornado spoke of the rear wheel increases thickness more and more even more the front wheel and be showing off the existence impression. The wheel rim width is 4.50 inches.

And, the rear wheel of BROS is supported with a pro arm. So, wheel should come off easily if it loosens the lock nut. But, being caught on the muffler actually it does not come off.
It is written to the service manual. "Draw out the air of the tire and apply soap water and slip with the muffler doing remove it." However, it does not occur feeling etc, that will step on such the procedure, to me which feel troublesomely to the work that makes soap water, to me which do not have the electromotion air pump more what furthermore. So, I have removed the muffler.

But, it is not attached frankly, granted that I will attach the muffler usually and this. If I have held the hang it is easy. It assumed to grapple with muffler endlessly when it is nonexistent so.

Incidentally, as for tire shop how did it do it on the occasion of the tire exchange? As for the time, muffler was side party' s muffler. Because clerk was exchanging it with the facial expression that felt relieved. I intend to try to do it with normal muffler this time. Even BT-45(released by BRIDGESTONE) is an exchange with about additional 8,000 km. Please be prepared for it. Huhahaha.......

---

But I think that it is not possible to remove the wheel smartly while the muffler is fixed in the case of it. So, that is get damaged to the wheel a little is had acknowledged and have removed the wheel forcibly. (I use it well and although it is the tire speciality shop of a Tokyo)
Even if it says that my wheel that can not said with brightly originally. Because, I could not know whether or not it was got damaged after the exchange.